Ocura Cleaning Instructions

Cleaning and subsequent disinfection must be carried out at regular intervals.

The following times are usually observed.

• If required

• After each patient change
• In accordance with the guidelines of the operator’s hygiene plan

The product must always be disconnected from the mains supply by unplugging the mains plug before commencing cleaning work.

All General Surfaces 

• Clean all surfaces with a soft, damp cloth and polish completely dry. Abrasive cloth must not be used.
• Any stain, spills or soiling should be cleaned up immediately to prevent the possibility of permanent staining.
• For disinfection, use diluted chlorine products at a strength of 1,000ppm chlorine and 10,000ppm for blood/blood-stained body fluid spillages.
• All surfaces must be kept dry at all times. Exposure to wet or humid conditions could result in rust marks, paint lifting, discolouration, and/​or corrosion.
• Do not use concentrated bleach, synthetic detergents, solvents, wax polishes, or aerosol sprays on any surface.
• Using cleaning products contrary to the recommended instructions may compromise the integrity of the furniture and invalidate your warranty.

Electrical Components

• Electrical components must not be exposed to any form of liquid or humid conditions.
• Plastic casings containing actuators or handsets should be cleaned using a soft damp nonabrasive cloth and polished dry immediately.
• Do not use solvents, abrasives, synthetic detergents, wax polishes, or aerosol sprays on any electrical components.

Trolleys & Overbed Tables

• Clean all surfaces with a soft, damp cloth and polish completely dry.
• Under no circumstances should scouring sponges or cleaning agents containing abrasive particles, abrasives or other blunting substances be used.
• All surfaces must be kept dry at all times. Exposure to wet or humid conditions could result in rust marks, paint lifting, discolouration, and/​or corrosion. 
• Keep trolleys and tables away from direct sunlight.
• Exposure to wet or humid conditions could result in rust marks, paint lifting, discolouration, or corrosion.

Vinyl Upholstery

Our vinyl ranges offer excellent stain resistance and cleanability and have been tested for compatibility with the Department of Health and Social Care’s recommended cleaning regimes. Our vinyl is compatible with most NHS-approved cleaning solutions and wipes, including Chlor-Clean, Haz-tab, Actichlor-Plus, Milton, Clinell and Tristel.

Vinyl upholstery must be cleaned daily in order to maintain its appearance and to prevent any build-up of dirt and contaminants.

1. Wipe clean with a soft cloth (microfibre or similar), lightly dampened with a cleaning agent, if required, and cold water only. Do not use soap or cleaning solutions that contain alcohol, acetates, or solvents (mineral / white spirits).
2. Completely remove excess cleaner with a white, clean, damp cloth.
3. Completely dry the surface with a soft cloth (microfibre or similar). 

Ensure the vinyl is completely dry before putting the product back into use.

Any stains, spills, or soiling should be cleaned up promptly to prevent the possibility of permanent staining. Lacquers, strong cleaners, detergents, xylene-based solutions, and acetone may cause immediate damage and contribute to the deterioration of the material. The use of such cleaners is at the end user’s risk.

• Do not use organic solvents (e.g., petrol, benzene, turpentine, toluene, xylene or acetone, chlorides, aerosol sprays, chemical cleaning agents, or wax polishes to clean the vinyl).
• Oil, sweat and blood must be removed immediately. If disinfection is required, use diluted chlorine products at a strength of 1,000 ppm chlorine and 10,000ppm for blood/blood-stained body fluid spillages. Do not use excessive amounts of water to clean the vinyl.
• Care should be taken to protect the vinyl from oil-based products (including body oils) as continued use will cause the vinyl to harden.
• Dyes and pigments from, iodine, ballpoint pen, lipstick, newsprint, food colourings and clothing, e.g., jeans may be absorbed by the vinyl and cause permanent staining.
• Exposure to wet or humid conditions could result in rust marks, paint lifting, discolouration, or corrosion.

Cleaning results may vary, depending on the size of the stain, the cleaning product used and the time the surface is exposed.

The use of unsuitable cleaning agents, disinfectants, the incorrect mixing ratio, and insufficient care of the vinyl can cause damage to the surface coating for which Ocura Healthcare is not liable.

Please note, this guide on its own is not a warranty. It has recommendations for cleaning Ocura devices. Users are responsible for using and cleaning Ocura products safely with cleaning agents that do not affect the surface, composition, performance, or lifespan. For further support, contact our Customer Care team at customercare@​ocura.​co.​uk or call us on 01732 367777.